Universal Safe Garage Door Electric Cloning Remote Control Key Fob Car Gate 433MHZ

Features:

Privacy is strong.
One to one key copy.
Each key password alone save.
Can continuous repetitive copy use one million times.

Specification:

Transmission Power: ≤100mW
Emission Distance: 50 to 100m
Encoding Type: Self Copy
Modulation Mode: ASK (AM)
Operating Current: ≤ 8mA
Working Voltage: DC12V (27A battery included)
Working Frequency: 433.92MHz (Optional 315NHz)
Working Temperature: -10℃ to +50℃
Uses: garage doors, motorcycles, car alarm products, home security products, short-range wireless remote control products, industrial control products
Works with the following remote control IC modules (please check your original remote control before ordering), and your remotes also should be fixed code or learning code. AX5326-3, PT2262, PT2260, EV1527, FP527, PT2242, HT600, HT680, HT6207, HT6010, HT6012, HT6014, AX5326-4, SMC918, PT2240, HT6013, HT6013, HT12D etc

How to Program:

1. Press the One and Three buttons until the LED flashes - it takes around 3 seconds
2. Place the cloner remote and the original remote close together/side by side so that they are touching
3. Press a button on your original remote in the same time and one of the buttons on the clone remote and hold until the LED on the clone remote flashes steadily. (The Blue LED will first flash 3 times quick, then stops for a second, then flashes steadily for successful cloning)
4. Now programming is successful! If you want to program more buttons just repeat steps 2 to4. To reset the remote simply start again with step 1

Notice:

Before buying,please confirm whether your remote control can be copyed or not
Before buying,please make sure the copyed remote control operating frequency or choose & buy the frequency adjustable type remote control
The essential condition for the selection of the remote control;the copyed remote control operates normal,chip is compatible and frequency is correct
This copy of the remote control can not copy a computer code and rolling code, the device can only copy fixed code or learn codes.
Our remote control can copy the fixed codes and learning codes rather than stealth codes. It can't copy original car remote control, two-way remote control and rolling code remote control (Rolling code chips start with HCS commonly, such as HCS200, HCS201, HCS300, HCS301, etc)

Package Included:

1 X Garage Door Wireless Remote Control